Use this waves and optics revision guide to solve questions involving wave speed, frequency, wavelength, refraction, ray diagrams, lenses, and magnification. It combines the essential equations with a repeatable exam method, worked examples, checkpoints, and a revision tracker you can revisit as your course progresses.
Overview
Most waves and optics questions become manageable once you identify the model being tested. A wave equation problem usually connects speed, frequency, and wavelength. A refraction problem compares the direction or speed of light in different media. A lens problem requires a ray diagram, a sign convention, or both.
Before calculating, classify the question:
- Wave quantities: use v = fλ, where v is wave speed, f is frequency, and λ is wavelength.
- Refraction: use refractive index relationships or Snell’s law to connect angles and media.
- Ray diagrams: draw the normal, label angles from the normal, and show the ray’s change in direction.
- Lenses: use the thin-lens equation and magnification, while following the sign convention required by your course.
Keep units consistent. Frequency is measured in hertz, wavelength in metres, and wave speed in metres per second. Angles should normally be entered in degrees unless the question or calculator setting requires radians. For broader support with setting up physics word problems, see the step-by-step physics word-problem workflow.
What to track
1. The wave quantities
The core wave equation is:
v = fλ
Rearrange it before substituting:
- v = fλ for speed
- f = v ÷ λ for frequency
- λ = v ÷ f for wavelength
Track whether the source or the medium changes. When a wave enters a different medium, its speed and wavelength may change, but its frequency is generally set by the source and remains unchanged at the boundary. This distinction is a common exam checkpoint.
Example: A wave has a frequency of 250 Hz and a wavelength of 1.2 m. Its speed is:
v = fλ = 250 × 1.2 = 300 m/s
State the unit in the final line. Do not confuse frequency with period: T = 1 ÷ f, so a frequency of 250 Hz corresponds to a period of 0.004 s.
2. Refraction and refractive index
Refractive index can be defined using the speed of light in vacuum, c, and its speed in a medium, v:
n = c ÷ v
A larger refractive index means that light travels more slowly in that medium relative to vacuum. For a boundary between two media, Snell’s law is:
n1 sin θ1 = n2 sin θ2
Here, each angle is measured from the normal, not from the surface. If light enters a medium with a higher refractive index, it bends toward the normal. If it enters a lower-index medium, it bends away from the normal.
Example: Light travels from a medium with n1 = 1.00 into a medium with n2 = 1.50 at an incident angle of 30°. Rearrange Snell’s law:
sin θ2 = (n1 sin θ1) ÷ n2
Substituting gives sin θ2 = (1.00 × sin 30°) ÷ 1.50 = 0.333. Therefore, θ2 is approximately 19.5°. The refracted ray is closer to the normal, as expected for entry into the higher-index medium.
3. Ray diagrams and lens quantities
For a converging lens, track the focal points, optical centre, object distance, image distance, and image height. A useful ray-diagram checklist is:
- Draw the principal axis and mark the optical centre.
- Mark the focal points on both sides of the lens.
- Draw one ray parallel to the axis; after a converging lens it passes through the far focal point.
- Draw a ray through the optical centre; in the thin-lens model it continues approximately undeviated.
- Use the ray intersection to identify image position, orientation, and relative size.
The thin-lens equation is commonly written as:
1/f = 1/u + 1/v
Magnification is:
m = image height ÷ object height
Some courses use a signed form such as m = v ÷ u, with signs indicating orientation or whether an image is real or virtual. Do not mix conventions from different textbooks. At the start of a revision session, record the convention used by your class or examination specification.
Example: A converging lens has focal length 10 cm and an object is placed 30 cm from it. Using positive distances for this magnitude calculation:
1/v = 1/f − 1/u = 1/10 − 1/30 = 1/15
Thus, the image distance is 15 cm. The magnification in magnitude is 15 ÷ 30 = 0.50, so the image is half the object’s height. A complete answer should still state whether the image is inverted, real, or virtual according to the diagram and sign convention.
Cadence and checkpoints
Use a short recurring review rather than waiting until the night before an exam. A practical weekly or fortnightly tracker can include these checkpoints:
| Checkpoint | What to record | Evidence of progress |
|---|---|---|
| Wave equations | Three problems involving v, f, and λ | Correct rearrangement, units, and sensible magnitude |
| Refraction | One diagram and two Snell’s law calculations | Angles measured from the normal and direction explained |
| Lenses | Two ray diagrams and two lens-equation problems | Image properties agree with the diagram |
| Exam communication | One timed multi-step question | Known values, equation, substitution, answer, and units are visible |
Mark each attempt as secure, inconsistent, or not yet secure. Record the type of error rather than only the score: unit conversion, calculator mode, diagram label, equation selection, algebra, or interpretation. If your course includes practical work, also track whether you can describe measurements, uncertainties, and limitations. The physics uncertainty and significant-figures guide can help with that part of revision.
How to interpret changes
When your answers improve, check whether the improvement comes from understanding or from repeating familiar numbers. Change the values, reverse the direction of refraction, and include questions that require a rearrangement. You should be able to explain why the answer is reasonable, not only reproduce a procedure.
Use these diagnostic rules:
- If the wave speed is wrong but the arithmetic is correct, check unit prefixes such as centimetres, millimetres, and kilohertz.
- If a refraction angle seems physically impossible, check that the angles were measured from the normal and that the calculator is in the expected angle mode.
- If the ray diagram and lens calculation disagree, check the object position relative to the focal point and review the sign convention.
- If you can calculate but cannot explain, practise stating the physical reason: frequency is source-controlled, a higher-index medium slows light, or a converging lens changes ray direction.
For exam preparation, show enough working for a marker to follow the method. A reliable layout is: list known quantities, identify the required quantity, write the equation, substitute with units, calculate, and interpret the result. This approach also supports related mechanics and electricity revision, such as the equation selection used in kinematics problems and circuit calculations.
When to revisit
Revisit this guide at the start of each new waves or optics unit, after completing a set of marked questions, and during the final two to four weeks before an exam. Return sooner if your teacher changes the required equation list, diagram labels, practical terminology, or lens sign convention. AP, GCSE, A-Level, and introductory college courses can place different emphasis on derivations, ray construction, uncertainty, or written explanations, so compare this guide with your current specification and class notes.
For a final review session, complete one unseen question from each category: a wave-equation problem, a refraction calculation, a ray diagram, and a lens equation problem. Check units, normal lines, angle mode, signs, and image descriptions. Then update your tracker with the error that appeared most often and schedule a focused practice session rather than rereading the whole topic. This turns a general physics study guide into a working revision record you can improve throughout the course.