Circular Motion and Gravitation Problems: Centripetal Force, Orbits, and Weightlessness
circular motiongravitationcentripetal forceorbitsapparent weightsolved problems

Circular Motion and Gravitation Problems: Centripetal Force, Orbits, and Weightlessness

PPhysics.help Editorial Team
2026-11-20
7 min read

Solve circular-motion and gravitation problems with force diagrams, centripetal equations, orbit formulas, and apparent-weight checks.

Circular-motion and gravitation questions become much easier when you separate the required inward acceleration from the forces that produce it. This guide gives you a reusable checklist, comparison table, and step-by-step solved problems for horizontal circles, vertical circles, banked turns, circular orbits, and apparent weight.

Overview

An object moving in a circle is accelerating even when its speed is constant because its velocity is continually changing direction. The acceleration points toward the center of the circle and is called centripetal acceleration:

ac = v2/r = ω2r

The corresponding net inward force is the centripetal force:

Fc = mac = mv2/r

A crucial distinction is that centripetal force is not usually a new, separate force. It is the name for the net inward component of real forces such as tension, friction, gravity, or the normal reaction. Your first task in every problem is therefore to identify the real forces and decide which combination points toward the center.

QuantityMeaningTypical equationDirection
Centripetal accelerationAcceleration required for circular motionac = v2/rToward the center
Centripetal forceNet force causing that accelerationFc = mv2/rToward the center
Gravitational forceAttraction between massesFg = GMm/r2Toward the attracting mass
Apparent weightUsually the normal force felt by an objectOften N, not always mgDepends on the contact surface

Use SI units unless a question specifies otherwise: mass in kilograms, distance in metres, speed in metres per second, and force in newtons. Near Earth, use the value of g supplied by your course or examination. For gravitational problems involving planets or satellites, use G, the universal gravitational constant, with the value provided on the relevant equation sheet when available.

Checklist by scenario

1. Horizontal circle: tension or friction supplies the inward force

For a mass moving in a horizontal circle at constant height, draw the circle and mark the center. Then draw a force diagram. If a string provides the inward force, the radial equation is:

T = mv2/r

Example: A 0.50 kg object moves in a horizontal circle of radius 0.80 m at 4.0 m/s. Find the required inward force.

  1. Identify the known values: m = 0.50 kg, v = 4.0 m/s, and r = 0.80 m.
  2. Use Fc = mv2/r.
  3. Substitute: Fc = (0.50)(4.0)2/0.80 = 10 N.

The required centripetal force is 10 N. If the string is the only horizontal force, its tension is 10 N. The vertical forces may balance separately; do not include them in the horizontal radial equation unless the geometry requires it.

2. Vertical circle: choose a radial direction and keep signs consistent

In a vertical circle, gravity changes its radial contribution as the object moves. At the top, both tension and weight may point toward the center if the object is inside a string loop:

T + mg = mvtop2/r

At the bottom, the center is above the object, so tension points inward while weight points outward:

T - mg = mvbottom2/r

Example: A 2.0 kg object travels at 6.0 m/s at the bottom of a vertical circle of radius 1.5 m. Find the tension in the string, using g = 9.8 m/s2.

  1. At the bottom, inward is upward.
  2. Write the radial equation: T - mg = mv2/r.
  3. Rearrange: T = mv2/r + mg.
  4. Calculate: T = (2.0)(6.0)2/1.5 + (2.0)(9.8) = 48 + 19.6 = 67.6 N.

The tension is approximately 68 N. At the top, the signs would be different because the inward direction is downward. Always redraw the force diagram rather than copying the bottom equation.

3. Banked turns: horizontal and vertical components matter

On a frictionless banked road, the normal force is tilted. Its horizontal component supplies the centripetal force, while its vertical component balances the vehicle's weight:

N cos θ = mg
N sin θ = mv2/r

Dividing the second equation by the first gives:

tan θ = v2/(rg)

Example: A turn has radius 50 m and is designed for a speed of 15 m/s without relying on friction. Taking g = 9.8 m/s2, the banking angle is:

θ = tan-1[152/(50 × 9.8)] = tan-1(0.459) ≈ 24.7°

The ideal banking angle is therefore about 25°. If friction is included, add friction to the force diagram and establish its direction from the tendency of the vehicle to slide.

4. Circular orbits: gravity is the centripetal force

For a satellite in a circular orbit, gravitational attraction supplies the entire centripetal force:

GMm/r2 = mv2/r

Cancel the satellite mass and solve for orbital speed:

v = √(GM/r)

This result shows that orbital speed depends on the mass of the central body and the orbital radius, not on the satellite's own mass. The radius r is measured from the center of the planet or star, not from its surface.

Example: If a satellite's orbital radius is increased while the central mass stays the same, its speed decreases according to v ∝ 1/√r. Its orbital period follows T = 2πr/v, so the larger orbit takes longer to complete.

5. Apparent weight and weightlessness

True gravitational weight is the force mg. Apparent weight is commonly the contact force, such as a normal reaction from a floor or a scale reading. These are equal only when there is no acceleration in the relevant direction.

For a person at the bottom of a vertical circular path:

N - mg = mv2/r, so N = mg + mv2/r.

At the top, if inward is downward:

mg - N = mv2/r, so N = mg - mv2/r.

In an orbit, a satellite and its occupants are continuously falling together under gravity. The normal contact force can be approximately zero, which is why occupants experience apparent weightlessness. Gravity has not disappeared; it is providing the centripetal acceleration.

What to double-check

  • Radius versus diameter: The radius is the distance from the center to the object. If a diameter is given, divide it by two.
  • Center direction: Mark the center before writing a force equation. The inward direction changes from the top to the bottom of a vertical circle.
  • Real forces versus centripetal force: Do not draw “centripetal force” as an additional force beside tension, gravity, friction, or the normal reaction.
  • Units: Convert kilometres to metres and hours to seconds before using equations such as mv2/r.
  • Orbit radius: For a satellite above a planet, use planet radius plus altitude, not altitude alone.
  • Vector components: On banked turns, resolve the normal force and any friction into radial and vertical components.
  • Reasonable size: Increasing speed increases centripetal force as v2. Doubling speed therefore requires four times the inward force at the same radius.

For a broader force-diagram workflow, review the Newton's Laws Practice Problems guide. If a problem combines circular motion with projectile motion, the projectile motion calculator guide can help you keep the horizontal and vertical descriptions separate.

Common mistakes

Using F = mv/r: The speed must be squared: Fc = mv2/r. A missing square produces the wrong units and value.

Assuming centripetal force is always tension: Tension is only the source of the inward force when a string or cable provides it. In an orbit, gravity provides it; on a road, friction or a normal-force component may provide it.

Setting normal force equal to mg automatically: This works only when the object has no acceleration in the direction being considered. In a vertical circle, a lift, or a curved track, the normal force generally differs from mg.

Ignoring the sign of gravity: Gravity always points downward, but “inward” may be upward or downward depending on position. Define inward as positive and assign each force a sign.

Confusing speed with velocity: Constant speed does not mean zero acceleration in circular motion. The direction of velocity changes continuously.

When to revisit

Use this checklist again before a circular-motion or gravitation test, especially when your course introduces a new force arrangement such as banked roads, loops, or satellites. Revisit it whenever a problem changes from a horizontal circle to a vertical one, changes the reference point for orbital radius, or asks for apparent weight instead of gravitational force.

For exam preparation, practise the same setup with altered values: change the speed, radius, mass, or location in the circle and predict how the answer should respond before calculating. A useful final routine is:

  1. Sketch the path and mark the center.
  2. Draw only the real forces.
  3. Choose radial and, if needed, tangential directions.
  4. Write the net-force equation before substituting numbers.
  5. Check units, signs, and whether the result is physically reasonable.

Keep this guide alongside your other physics reference material. For related practice, see the vectors guide for components and the physics word-problem workflow for translating unfamiliar wording into equations.

Related Topics

#circular motion#gravitation#centripetal force#orbits#apparent weight#solved problems
P

Physics.help Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.