Kinematics Equations Explained: Choosing the Right Formula for Motion Problems
physics helpkinematicsmechanicsSUVAT equationsworked examplesexam prep

Kinematics Equations Explained: Choosing the Right Formula for Motion Problems

PPhysics.help Editorial Team
2026-11-12
6 min read

Learn which kinematics equation to use, manage signs and units, and solve constant-acceleration motion problems step by step.

Kinematics problems become much easier when you choose an equation from the information you know, rather than trying to memorize a single formula for every situation. This guide explains the constant-acceleration equations, shows which variables each one connects, and works through examples involving speeding up, slowing down, and vertical motion.

Overview

Kinematics describes motion without asking what causes it. The main quantities are initial velocity (u), final velocity (v), acceleration (a), time (t), and displacement (s). Many courses call these the SUVAT equations because of the traditional symbols used for displacement, initial velocity, final velocity, acceleration, and time.

The equations below apply only when acceleration is constant, or when a problem treats it as constant over the interval being studied:

  • v = u + at
  • s = ut + ½at²
  • v² = u² + 2as
  • s = ½(u + v)t
  • s = vt − ½at²

These are not five unrelated formulas. They are different ways of describing the same constant-acceleration model. The most useful selection rule is simple: choose an equation that contains the quantity you want to find and only quantities whose values are known. Avoid an equation containing two unknowns unless you have another independent equation ready to use.

Which kinematics equation should you use?

EquationUse it when you knowEspecially useful for
v = u + atu, a, and tFinding velocity after a known time
s = ut + ½at²u, a, and tFinding displacement when time is known
v² = u² + 2asu, a, and sFinding velocity or displacement without time
s = ½(u + v)tu, v, and tUsing average velocity directly
s = vt − ½at²v, a, and tFinding displacement when final velocity is convenient

A quick way to select an equation is to list the five variables first. Mark the values given in the question, identify the target, and select a formula containing those quantities but no additional unknown. This variable-first method is more reliable than choosing a formula because it looks familiar.

How to estimate

For a constant-acceleration calculation, use the following repeatable workflow:

  1. Describe the interval. Decide where the motion starts and ends. For example, the interval might run from the moment a cyclist begins accelerating to three seconds later.
  2. Choose a positive direction. Write it down. In one-dimensional motion, upward can be positive and downward negative, or the reverse.
  3. List known and unknown quantities. Include units for every value. If an object starts from rest, write u = 0 m/s; do not leave that fact only in your notes.
  4. Select the equation. Match the known variables to one of the equations in the table.
  5. Substitute with signs and units. Keep the equation visible before entering numbers in a calculator.
  6. Check the result. Consider the unit, direction, magnitude, and whether the answer agrees with the physical description.

For example, if a car has an initial velocity of 6 m/s, accelerates at 2 m/s² for 5 s, and you need its final velocity, use v = u + at:

v = 6 + (2)(5) = 16 m/s

The acceleration is positive because the chosen positive direction is the direction in which the car is moving. For a fuller method for translating words into variables and diagrams, see How to Solve Physics Word Problems.

Acceleration and average velocity

Under constant acceleration, the average velocity is the mean of the initial and final velocities:

average velocity = (u + v) / 2

Multiplying average velocity by time gives s = ½(u + v)t. This relationship is useful when both endpoint velocities and the elapsed time are known. It should not be applied automatically when acceleration changes during the interval.

Inputs and assumptions

Good kinematics solutions depend on consistent inputs. Use this checklist before calculating:

  • Displacement versus distance: Displacement includes direction and may be negative. Distance is the total path length and is not generally interchangeable with displacement.
  • Velocity versus speed: Velocity has a sign or direction; speed is its magnitude.
  • Units: Convert time to seconds and velocity to metres per second when using SI units. Acceleration should then be in metres per second squared and displacement in metres.
  • Rest: “Starts from rest” means the initial velocity is zero, not that the acceleration is zero.
  • Constant acceleration: The equations assume acceleration does not change over the selected interval.
  • Rounding: Keep extra digits during intermediate steps and round the final answer sensibly. For lab work, follow the required significant-figure convention; the uncertainty and significant figures guide provides a useful review.

Vertical motion requires particular care with signs. Near Earth’s surface, the acceleration due to gravity is commonly represented as approximately 9.8 m/s² downward. If upward is positive, use a = −9.8 m/s². If downward is positive, use a = +9.8 m/s². Either convention works if it is used consistently.

Worked examples

1. Object speeding up

A bicycle moves at 4 m/s and accelerates at 1.5 m/s² for 6 s. Find its final velocity and displacement.

Known: u = 4 m/s, a = 1.5 m/s², t = 6 s.

For final velocity:

v = u + at = 4 + (1.5)(6) = 13 m/s

For displacement, use the equation containing u, a, and t:

s = ut + ½at²

s = (4)(6) + ½(1.5)(6²) = 24 + 27 = 51 m

The positive displacement indicates motion in the chosen positive direction. The final velocity is larger than the initial velocity, which is consistent with positive acceleration.

2. Object slowing down

A runner moving at 8 m/s slows uniformly at 2 m/s². How far does the runner travel before stopping?

Choose the direction of the runner’s initial motion as positive. Then u = 8 m/s, v = 0 m/s, and a = −2 m/s². Time is not given, so use the equation that does not contain t:

v² = u² + 2as

Substitute:

0² = 8² + 2(−2)s

0 = 64 − 4s, so s = 16 m.

The negative acceleration does not mean the stopping distance is negative. It describes acceleration opposite to the positive direction; the calculated displacement is positive because the runner still moves forward before stopping.

3. Vertical fall

A ball is released from rest and falls for 2.0 s. Ignore air resistance. Find its displacement and final velocity, taking downward as positive.

Because the ball is released, u = 0 m/s. With downward positive, use a = 9.8 m/s² and t = 2.0 s.

Displacement:

s = ut + ½at² = (0)(2.0) + ½(9.8)(2.0²) = 19.6 m

Final velocity:

v = u + at = 0 + (9.8)(2.0) = 19.6 m/s

Both results are positive because downward was defined as positive. If upward had been positive, the same physical answers would appear with negative signs.

For two-dimensional motion, separate horizontal and vertical components rather than forcing one SUVAT equation to describe the entire path. The vectors guide and projectile motion calculator guide explain that setup in more detail.

When to recalculate

Revisit a kinematics calculation whenever an input, assumption, or sign convention changes. Recalculate if the time interval is different, a measured starting velocity is updated, the acceleration is no longer treated as constant, or the question changes from displacement to total distance. In a practical investigation, repeat the calculation when new measurements or uncertainty estimates are available.

Before an exam, use a fresh mixed set rather than repeating only one familiar pattern. Include one problem where time is unknown, one involving negative acceleration, one vertical-motion problem, and one that requires separate horizontal and vertical analysis. For AP, GCSE, A-Level, or introductory college revision, compare the symbols and required rounding conventions on your course’s formula sheet with the notation used here. A broader physics formula sheet can help you place kinematics alongside other mechanics equations.

Finally, check every answer with three questions: Does the unit match the requested quantity? Does the sign match the direction I chose? Does the result make physical sense? This short review catches many substitution errors before they become lost marks.

Related Topics

#physics help#kinematics#mechanics#SUVAT equations#worked examples#exam prep
P

Physics.help Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.