Physics Formula Sheet: Essential Equations for Mechanics, Electricity, Waves, and Thermodynamics
physics formula sheetphysics equationsSI unitsmechanics formulaselectricity formulaswavesthermodynamicsexam prep

Physics Formula Sheet: Essential Equations for Mechanics, Electricity, Waves, and Thermodynamics

PPhysics Help Editorial Team
2026-11-02
6 min read

A practical physics formula sheet covering mechanics, electricity, waves, and thermodynamics with SI units, assumptions, and checking tips.

This physics formula sheet brings the most-used equations for mechanics, electricity, waves, and thermodynamics into one practical reference. Each section identifies variables, SI units, useful rearrangements, and the assumptions that determine whether an equation applies. Use it alongside worked practice rather than treating it as a substitute for understanding the physical situation.

Overview

A formula is useful only when its quantities describe the same physical model. Before substituting numbers, identify what is known, what is unknown, which direction is positive, and whether the conditions match the equation. Convert measurements to compatible SI units unless your course or question explicitly uses another system.

The core SI units to recognize are metre (m) for distance, kilogram (kg) for mass, second (s) for time, ampere (A) for current, kelvin (K) for temperature, joule (J) for energy, watt (W) for power, volt (V) for potential difference, and ohm (Ω) for resistance. Common derived units include newtons (N), where 1 N = 1 kg·m/s², and pascals (Pa), where 1 Pa = 1 N/m².

For a broader method, use this step-by-step guide to solving physics word problems. The formula sheet below is most effective after you have drawn a diagram and translated the wording into physical quantities.

Checklist by scenario

Mechanics: motion, forces, and energy

  • Speed and velocity: average speed = total distance / total time; average velocity = displacement / time. Speed is scalar, while velocity includes direction.
  • Constant-acceleration motion: v = u + at; s = ut + ½at²; v² = u² + 2as; s = ½(u + v)t. Here, u is initial velocity, v is final velocity, a is constant acceleration, s is displacement, and t is time.
  • Newton’s second law: ΣF = ma. Use the vector sum of forces, not just one force, and choose a consistent sign convention.
  • Weight: W = mg, where g is gravitational field strength or acceleration due to gravity. Near Earth, many introductory problems use g ≈ 9.8 m/s², unless a question specifies another value.
  • Momentum and impulse: p = mv and impulse = FΔt = Δp. Momentum is conserved in an isolated system, including collisions where kinetic energy may not be conserved.
  • Work: W = Fd cos θ for a constant force, where θ is the angle between force and displacement. If force and displacement are perpendicular, the work done is zero.
  • Kinetic and gravitational potential energy: Ek = ½mv² and Ep = mgh. Conservation of mechanical energy requires that relevant energy transfers, such as frictional work, are included or negligible.
  • Power and efficiency: P = W/t = ΔE/t; efficiency = useful output energy / total input energy × 100%.
  • Springs: F = kx and elastic potential energy = ½kx². Hooke’s law applies only within the elastic limit of the spring.

For practice, compare these equations with kinematics problems with step-by-step solutions and check whether the motion has constant acceleration before using a kinematics equation.

Electricity and circuits

  • Charge and current: I = Q/t, so Q = It. Current is the rate of flow of charge, measured in amperes.
  • Potential difference and energy: V = E/Q, so electrical energy transferred E = QV.
  • Ohm’s law: V = IR. This relationship applies to an ohmic component under conditions where its resistance remains constant.
  • Electrical power: P = IV = I²R = V²/R. Choose the form that uses the quantities given in the question.
  • Resistance: R = ρL/A, where ρ is resistivity, L is conductor length, and A is cross-sectional area.
  • Series circuits: current is the same through each component, total resistance is Rtotal = R₁ + R₂ + …, and supply voltage is shared.
  • Parallel circuits: voltage is the same across each branch, current splits between branches, and 1/Rtotal = 1/R₁ + 1/R₂ + ….

When solving circuit analysis questions, label every current and potential difference before substituting values. For additional context, review when formula triangles help and when they mislead; rearranging an equation is only valid if the underlying relationship applies.

Waves and optics

  • Wave speed: v = fλ, where f is frequency and λ is wavelength.
  • Frequency and period: f = 1/T, where T is the period in seconds.
  • Refraction: n₁ sin θ₁ = n₂ sin θ₂. Angles are measured from the normal, not from the surface.
  • Refractive index: n = c/v, where c is the speed of light in vacuum and v is its speed in the medium.
  • Thin lenses: 1/f = 1/u + 1/v and magnification = image height / object height = v/u, using the sign convention required by your course.

Thermal physics

  • Heating or cooling: Q = mcΔT, where c is specific heat capacity.
  • Change of state: Q = mL, where L is specific latent heat. Temperature remains constant during an idealized phase change.
  • Ideal gas law: pV = nRT, where n is amount of substance in moles and T must be measured in kelvin.
  • First law of thermodynamics: ΔU = Q − W if W is work done by the system. Some courses define W as work done on the system, producing a different sign convention; follow the convention stated in your textbook or question.

What to double-check

  1. Units: Convert kilometres to metres, hours to seconds, milli- or micro-units to base units, and degrees Celsius to kelvin where required. Do not add quantities with incompatible units.
  2. Vectors and signs: Displacement, velocity, acceleration, force, and momentum can have direction. A negative answer may describe direction rather than an error.
  3. Conditions: Ask whether acceleration is constant, whether a gas is being treated as ideal, whether resistance is constant, or whether friction and air resistance should be included.
  4. Significant figures: Keep extra digits during intermediate calculations and round the final answer to a precision supported by the data or required by the assessment.
  5. Magnitude and direction: State both when the quantity is a vector. “12 m/s” and “12 m/s east” are not equally complete answers.
  6. Reasonableness: Check the scale, units, and limiting behavior. For example, doubling mass should double weight, while doubling speed should quadruple kinetic energy.

Common mistakes

One frequent mistake is choosing an equation because it contains the desired unknown rather than because its assumptions fit the problem. A projectile-motion question may require horizontal and vertical components, not one direct speed formula. Similarly, conservation of energy does not mean kinetic energy is always conserved; friction can transfer mechanical energy into thermal energy.

Another error is confusing mass with weight, power with energy, or voltage with current. Mass is measured in kilograms, weight in newtons, energy in joules, and power in watts. In circuits, current is charge per time, while voltage is energy transferred per charge.

Students also often insert degrees Celsius into gas-law calculations. Use kelvin for absolute temperature: T(K) = T(°C) + 273.15. Finally, avoid using a memorized formula triangle without checking symbols, signs, and definitions. A rearranged equation cannot correct an incorrect model.

When to revisit

Return to this physics equation sheet before each new unit, after receiving marked work, and during exam preparation. Add the exact sign conventions, constants, and permitted equations used by your course or examination board; these can differ between classes. Revisit the mechanics section before solving a new set of kinematics or Newton’s laws problems, and revisit electricity formulas before circuit questions so that series and parallel rules are immediately available.

Use the sheet actively: cover one variable definition and recall it, derive a rearranged form, then solve one short problem without looking at the answer. For an organized revision cycle, pair it with the physics exam-prep topic checklist and the formula checklist for deciding what to memorize and what to understand. Before submitting any solution, complete this final check: model identified, diagram drawn, equation justified, units converted, substitution shown, answer rounded, and direction or assumptions stated.

Related Topics

#physics formula sheet#physics equations#SI units#mechanics formulas#electricity formulas#waves#thermodynamics#exam prep
P

Physics Help Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.