Newton’s Laws Practice Problems: Free-Body Diagrams and Net Force Solutions
physics helpNewton’s lawsfree-body diagramsforcessolved problemsmechanics

Newton’s Laws Practice Problems: Free-Body Diagrams and Net Force Solutions

PPhysics.help Editorial Team
2026-11-13
7 min read

Learn to draw free-body diagrams and solve Newton’s laws problems for surfaces, inclines, connected objects, and lifts.

Newton’s laws become much easier to use when every force is identified before any equation is written. This guide gives you a reusable free-body-diagram checklist, a comparison of common forces, and step-by-step net-force problems involving horizontal surfaces, inclines, connected objects, and lifts.

Overview

A free-body diagram (FBD) shows all external forces acting on one chosen object. It is not a picture of the entire situation: isolate one object, represent it as a dot or simple box, and draw a labeled arrow for each force acting on it.

Newton’s second law connects the diagram to the motion:

ΣF = ma

Here, ΣF means the vector sum of the forces, m is mass, and a is acceleration. The equation must be applied separately in each useful direction, such as horizontal and vertical axes or axes parallel and perpendicular to an incline.

Force-identification checklist

  1. Choose the object you are analyzing.
  2. Draw a boundary around that object and ignore forces acting on other objects.
  3. Add the weight, W = mg, pointing vertically downward.
  4. Add a normal force if the object touches a surface. The normal force is perpendicular to the surface.
  5. Add friction only when the surfaces resist relative motion or attempted motion. Friction acts along the surface, opposite the relative motion or its tendency.
  6. Add tension when a rope, cable, or string pulls the object. Tension points along the rope.
  7. Add an applied force, spring force, thrust, drag, or other relevant interaction if the problem describes one.
  8. Choose positive directions and keep that sign convention throughout the calculation.
ForceTypical symbolDirectionImportant reminder
WeightW or mgVertically downwardUse the local gravitational field value supplied or assumed in the problem.
Normal forceNPerpendicular to the contact surfaceIt is not always equal to the weight.
FrictionfAlong the surfaceOpposes relative motion or the tendency to move.
TensionTAlong a taut ropeFor an ideal massless rope and pulley, connected sections may share the same tension.
DragFDOpposite the object’s motion through a fluidUse a stated drag model; do not automatically treat drag as friction.

For more practice with choosing axes and resolving forces, review Physics Vectors Made Simple. A systematic approach to translating words into equations is also covered in How to Solve Physics Word Problems.

Checklist by scenario

1. Horizontal surface with friction

Problem: A 10 kg box is pushed horizontally with a force of 30 N. Friction opposing the motion is 8 N. Find the net force and acceleration. Assume the push is horizontal and the surface is level.

  1. Draw the FBD. The forces are weight downward, normal force upward, the 30 N push to the right, and 8 N of friction to the left.
  2. Choose positive right. The horizontal equation is ΣFx = 30 − 8.
  3. Find the net force. ΣFx = 22 N to the right.
  4. Apply Newton’s second law. a = ΣF/m = 22/10 = 2.2 m/s² to the right.

Vertically, the box has no acceleration, so ΣFy = 0. Therefore N − mg = 0 and N = mg under these stated conditions. This vertical balance does not mean that the normal force can be ignored when the surface is angled or when an additional vertical force is applied.

2. Object on an incline

Problem: A 5.0 kg block rests on a 30° incline. The coefficient of kinetic friction is 0.20, and the block slides down the incline. Find its acceleration. Take g = 9.8 m/s².

  1. Choose axes along the incline. Let downhill be positive parallel to the surface. The perpendicular axis points away from the surface.
  2. Resolve the weight. The component down the slope is mg sin θ, while the component into the slope is mg cos θ.
  3. Find the normal force. There is no acceleration perpendicular to the surface, so N = mg cos θ = (5.0)(9.8)cos 30° ≈ 42.4 N.
  4. Find friction. fk = μkN = (0.20)(42.4) ≈ 8.5 N uphill.
  5. Write the parallel equation. ΣFparallel = mg sin θ − fk = (5.0)(9.8)sin 30° − 8.5 ≈ 16.0 N downhill.
  6. Calculate acceleration. a = 16.0/5.0 ≈ 3.2 m/s² downhill.

The most important diagram choice is the direction of friction. It points uphill here because the block is sliding downhill. If the block were stationary and the question asked whether it would begin to move, static friction would adjust up to its maximum possible value rather than automatically equaling μkN.

3. Two connected objects on a frictionless surface

Problem: A 4 kg cart is connected by a light, taut rope to a 6 kg cart. A horizontal 25 N force pulls the 6 kg cart to the right. Ignore friction. Find the acceleration and the rope tension.

  1. Treat both carts as one system. The external horizontal force is 25 N and the total mass is 10 kg.
  2. Find acceleration. a = 25/10 = 2.5 m/s² to the right.
  3. Isolate the 4 kg cart. Its only horizontal force is the rope tension, so T = ma = (4)(2.5) = 10 N.

Using the system first avoids treating the tension as an external force. Tension is internal to the two-cart system and cancels when the carts are analyzed together. It reappears when one cart is isolated.

4. A person or object in a lift

Problem: A 70 kg person is in a lift accelerating upward at 1.5 m/s². Find the normal force exerted by the floor.

  1. Draw weight, mg, downward and normal force, N, upward.
  2. Choose upward as positive: N − mg = ma.
  3. Rearrange: N = m(g + a).
  4. Substitute: N = 70(9.8 + 1.5) = 791 N, approximately.

The normal force is greater than the person’s weight because the floor must provide an upward net force. If the lift accelerated downward, the equation would instead be N = m(g − a), provided the person remained in contact with the floor.

What to double-check

  • One object at a time: Every arrow on an FBD must act on the selected object. Do not draw the force that the object exerts on something else.
  • Vector direction: Weight is vertical, but the normal force is perpendicular to the surface. On an incline, these directions are different.
  • Components: For an incline angle measured from the horizontal, the weight component parallel to the slope is mg sin θ and the perpendicular component is mg cos θ.
  • Net force versus individual force: Acceleration depends on the resultant force, not on the largest single arrow.
  • Static versus kinetic friction: Kinetic friction applies while surfaces slide. Static friction prevents slipping and may be less than its maximum value.
  • Units and signs: Force should be in newtons, mass in kilograms, and acceleration in metres per second squared. A negative result usually means the actual direction is opposite to the chosen positive direction.
  • Reasonableness: If the net force is zero, acceleration is zero, although the object may still move at constant velocity. If a nonzero net force acts on a positive mass, the acceleration cannot be zero.

Common mistakes

Drawing motion arrows as forces. Velocity and acceleration are not forces. Include them only as separate labeled quantities if they help explain the motion.

Assuming N = mg in every problem. This is appropriate for a level surface with no vertical acceleration and no additional vertical forces. It is not generally true on an incline, in a lift, or when a rope pulls at an angle.

Making friction point in a convenient direction. Determine the direction of actual or impending relative motion first. Friction is not always opposite the object’s overall velocity; it opposes relative sliding at the contact.

Using the wrong mass in a connected-system equation. When analyzing all connected objects together, use their total mass. When analyzing one object to find tension, use that object’s mass.

Skipping the diagram. Substituting numbers immediately often hides a missing force or an incorrect sign. A clear FBD is part of the solution, not decoration.

For exam-style explanations, especially when marks depend on showing reasoning, the AP Physics free-response strategy offers a useful model. Keep significant figures consistent with the given data; the related uncertainty and significant-figures guide can help with presentation.

When to revisit

Use this checklist whenever a new force setup appears in homework, revision, or an exam. Revisit it especially when the problem changes from a level surface to an incline, introduces a pulley or connected objects, adds friction, or describes an accelerating lift. Those changes alter the diagram, the axes, or both.

Before submitting a solution, run this final sequence:

  1. Circle the object being analyzed.
  2. Count and label every external force.
  3. Mark the positive directions.
  4. Resolve angled forces into components where necessary.
  5. Write one Newton’s second-law equation per axis.
  6. Check units, signs, and the physical direction of the answer.
  7. State assumptions such as a frictionless surface, ideal rope, or negligible air resistance.

Then practise the same setup with one changed quantity: reverse the acceleration, add friction, alter the incline angle, or change which object is pulled. Solving a variation without copying the original diagram is one of the most reliable ways to turn Newton’s laws practice problems into lasting exam skill.

Related Topics

#physics help#Newton’s laws#free-body diagrams#forces#solved problems#mechanics
P

Physics.help Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.