Momentum and collision problems become manageable when you separate the event into before and after states, choose a sign convention, and apply the right conservation law. This guide explains impulse, conservation of momentum, elastic and inelastic collisions, and energy checks through step-by-step physics solved problems involving carts, recoil, explosions, and bouncing objects.
Overview
Momentum describes how difficult it is to stop a moving object. It depends on both mass and velocity:
p = mv
Here, p is momentum in kilogram-metres per second (kg·m/s), m is mass in kilograms, and v is velocity in metres per second. Because velocity has direction, momentum is a vector. In a one-dimensional problem, a convenient sign convention is to call rightward motion positive and leftward motion negative.
The impulse-momentum theorem connects force and momentum change:
J = FΔt = Δp = pf − pi
If force varies during the interaction, use the area under a force-time graph for impulse rather than simply multiplying one force by one time interval.
For an isolated system, total momentum before an interaction equals total momentum after it:
Σpbefore = Σpafter
“Isolated” means that the net external impulse is zero or small enough to ignore during the collision. A trolley collision on a nearly level track may be treated this way for a short interaction, while a ball being slowed by a wall usually requires careful attention to the wall’s impulse.
| Event | Momentum | Kinetic energy | Typical equation |
|---|---|---|---|
| Any isolated collision | Conserved | May change | Σmv before = Σmv after |
| Perfectly inelastic collision | Conserved | Not conserved | m1v1 + m2v2 = (m1 + m2)v |
| Elastic collision | Conserved | Conserved | Momentum equation plus kinetic-energy equation |
| Explosion or recoil | Conserved if initially at rest | May increase | 0 = m1v1 + m2v2 |
| Bounce from a surface | Object momentum changes | May change | J = Δp |
How to estimate
Use this repeatable workflow for most momentum problems with solutions:
- Define the system. Decide which objects are included. For two colliding carts, include both carts if you want to conserve their combined momentum.
- Draw the before-and-after states. Label every mass and velocity. Do not assume an object is stationary unless the problem says so.
- Choose a positive direction. Assign positive signs to velocities in that direction and negative signs to velocities in the opposite direction.
- Convert units. Momentum calculations normally require kilograms and metres per second. Convert grams to kilograms and kilometres per hour to metres per second before substituting.
- Choose the governing equation. Use conservation of momentum for an isolated interaction, impulse for a force acting over time, and conservation of kinetic energy only when the collision is elastic or the question explicitly permits that model.
- Solve symbolically first. Rearranging the equation before entering numbers makes signs and units easier to inspect.
- Interpret the sign. A negative final velocity means motion opposite to your chosen positive direction. It is not automatically an error.
- Check the result. Confirm the units, direction, approximate size, and whether the result fits the physical situation.
For a one-dimensional collision, the standard starting point is:
m1u1 + m2u2 = m1v1 + m2v2
The symbols u and v commonly represent initial and final velocity. If the objects stick together, set both final velocities equal to the same value. If they separate, keep the final velocities distinct.
Inputs and assumptions
Before using a physics calculator or equation sheet, identify the inputs and the model behind them.
- Mass: Use the mass of the object or system being analysed. Include both masses after two objects stick together.
- Velocity: Use velocity, not speed, when direction matters. Record its sign.
- Force and time: For impulse problems, state whether the force is constant. If it is constant, J = FΔt; if not, use the area under the force-time graph or a stated average force.
- Collision type: In a perfectly inelastic collision, objects stick. In an elastic collision, both momentum and kinetic energy are conserved. A real collision can conserve momentum while losing kinetic energy to sound, heat, deformation, or rotation.
- External forces: Friction, a slope, or a motor can provide external impulse. If that impulse is significant, do not apply simple momentum conservation to the objects alone.
- Dimensions: In two dimensions, conserve momentum separately in perpendicular directions: Σpx,before = Σpx,after and Σpy,before = Σpy,after.
Keep extra digits during intermediate calculations and round the final answer to match the least precise measured input. For a short homework calculation, two or three significant figures is often appropriate unless the question specifies another convention.
Worked examples
Example 1: Two carts stick together
A 2.0 kg cart moves right at 3.0 m/s. It collides with a stationary 1.0 kg cart, and the carts stick together. Find their final velocity.
Take right as positive. The initial momentum is:
pbefore = (2.0)(3.0) + (1.0)(0) = 6.0 kg·m/s
After the collision, the combined mass is 3.0 kg:
6.0 = (3.0)v
v = 2.0 m/s
The carts move right at 2.0 m/s. Their kinetic energy is not conserved: before the collision it is 9.0 J, while after it is 6.0 J. The difference has been transferred to other forms of energy.
Example 2: Recoil after an explosion
A 5.0 kg object initially at rest breaks into a 2.0 kg piece that moves right at 6.0 m/s and a 3.0 kg piece. Find the velocity of the 3.0 kg piece.
The initial total momentum is zero. Therefore:
0 = (2.0)(6.0) + (3.0)v
v = −4.0 m/s
The negative sign means the larger piece moves left at 4.0 m/s. The pieces move in opposite directions so their momenta cancel. Momentum is conserved even though the explosion can increase the system’s kinetic energy through stored chemical or internal energy.
Example 3: Impulse when a ball bounces
A 0.15 kg ball approaches a wall at 12 m/s to the right and rebounds at 8.0 m/s to the left. Find the ball’s change in momentum.
Take right as positive. Then u = +12 m/s and v = −8.0 m/s:
Δp = m(v − u)
Δp = 0.15(−8.0 − 12) = −3.0 kg·m/s
The impulse on the ball is −3.0 N·s, or 3.0 N·s to the left. If the contact lasts 0.050 s, the average force is:
Favg = Δp/Δt = −3.0/0.050 = −60 N
This example shows why the direction change matters. Using only the speed difference, 12 − 8, would miss the fact that the ball reverses direction.
Example 4: A two-dimensional momentum setup
A 0.20 kg puck moving east at 5.0 m/s sticks to a 0.30 kg puck moving north at 4.0 m/s. Find the direction of the combined motion.
The eastward momentum is px = (0.20)(5.0) = 1.0 kg·m/s. The northward momentum is py = (0.30)(4.0) = 1.2 kg·m/s. The direction measured north of east is:
θ = tan−1(py/px) = tan−1(1.2/1.0) ≈ 50°
The combined puck travels approximately 50° north of east. A vector diagram or components method, explained further in the Physics Vectors Made Simple guide, helps prevent directional errors.
When to recalculate
Revisit a momentum solution whenever an input, system boundary, or assumption changes. Recalculate if a mass or velocity is corrected, if a cart no longer sticks, if the collision is described as elastic, or if a previously ignored external force becomes important. In laboratory work, update the result when measured values or uncertainty estimates change.
Before an exam, redo the problem with altered values and a reversed direction. Then try classifying an unfamiliar scenario without looking at the answer: collision, recoil, impulse, or two-dimensional momentum. For broader preparation, review the physics word-problem workflow and the guide to uncertainty and significant figures.
A practical final checklist is: define the system, draw before and after, choose positive directions, convert units, write total momentum on both sides, include impulse when an external force acts, solve, and interpret the sign. Working through that sequence consistently is more reliable than searching for a single formula that appears to match the wording.